6
Installation
1� Micro SD Card Installation (Optional)
1. Remove the cover on the camera.
2. Insert the micro SD card (sold separately) into the card slot.
3. Fix the cover to the camera.
Micro SD Card Slot
（
remove the cover
）
After installing the micro SD card, you should initialize the card in the EZVIZ app
before using it.
4. In the EZVIZ app, tap the Storage Status in the Device Settings interface to
check the SD card status.
5. If the memory card status displays as Uninitialized, tap to initialize it.
The status will then change to
Normal
and then videos can be stored.
2� Installation Location
• Choose a location with a clear, unblocked field of view and with a good wireless
signal.
•
Make sure the wall is strong enough to withstand three times the weight of the
camera.
•
Camera cannot be installed with the lens facing direct sunlight.
3� Installation Procedure
The camera can be wall mounted, ceiling mounted, and pole mounted.
Ceiling/Wall Mount
1. Remove the protective film from the lens.
2. Stick the drilling template onto a clean and flat surface.
3. (For cement wall only) Drill screw holes according to the template, and insert
anchors.
4. Use screws to fix the camera on the installation surface.
