Installaon Guide
Smart Wireless Video Doorbell SH343
INSTALL AND CONNECT THE MOBILE APP—Connued
16. CONGRATULATIONS. You have completed
the doorbell / phone App setup.
17. Give the doorbell a relevant name such as
“Front of House” or “Back door”
18. Then press CONFIRM.
19. The LED on the front of the doorbell will now
turn
BLUE
to indicate all is working.
20. Make sure you remove the clear plasc film
from the front of the doorbell.
If you need to reconfigure your doorbell
WiFi network, press and hold the reset key
for 5 seconds. This will reset the doorbell
back to factory default, the red light will
flash slowly again and you can follow these
instrucons to start again.
INSTALL AND PAIR THE INDOOR CHIME
Plug the indoor chime into the powerpoint and switch the
powerpoint on.
Press the doorbell bu0on. You should hear a “Ding dong” sound
from the indoor chime and see the doorbell bu0on flash for up to
8 seconds. The chime is now paired and ready for use.
To adjust the chime volume, press the volume bu0on. The volume
will increase up to 5 levels. Keep pressing the volume bu0on unl
it is zero and connue unl you reach your desired level.
The chime has 55 different melodies. Press the forward or back-
ward bu0ons unl you hear the melody you like.
To clear all chime seNngs back to factory default, press and hold
the FORWARD bu0on for 5 seconds. You will hear a “Ding” sound.
This indicates the chime has been reset and the doorbell is not
paired any longer.
VOLUME
BACKWARD
FORWARD
