D
3)Just as the above mentioned, press button
to record
more than one lap time at the end of each lap.
4)At the end of each lap, press button
to begin to
run stopwatch, and press button
once again to stop
stopwatch.
Note: Please delete the initial lap time record before
using lap time for each time (see chapter 6.4). Otherwise,
the new lap time record will plus to the initial ones.
Note: Our watch can record 10 laps time at most.
th
The lap time will be plus to the 10 lap if there are
more than 10 lap.
C
In the status of stopwatch running,
the stopwatch will continue running
until 99 hours 59 minutes 59 seconds
even if exit the stopwatch mode.
In the time mode, flashing
means
the stopwatch in the running status.
6.3. Lap Time Data Query
After using the lap time, you can find the lap time
data in the data mode.
Selecting to the data mode (see chapter 4), our
watch will display the first lap time record. Press
button
, you can query each lap time data sequentially.
Each lap time and the total time will alternate display.
7
D
C
D
The 1st Lap Time Record
th
The 10 Lap Time Record
D
