eZi-DA66 Installation Manual
Revision 1.2
Page 15
12VDC TRIGGER INPUTS
•
PA- IN. Insert 12VDC and Input 1 takes priority over all other inputs and broadcasts to all 6 zones.
•
MUTE – IN. Insert 12VDC and all zones will be muted.
MASTER SLAVE
To use
multiple eZi-DA66’s, connect them together using the ribbon cable supplied with each unit. Ensure that all the eZi-DA66’s are powered off and the
mains socket removed BEFORE connecting the ribbon cables
3.5mm mono plug polarity TIP + / SLEEVE -
1.
Decide which device will be the Master
device. Slide the Master/Slave switch on
this unit to the Master position.
2.
Plug one end of the included ribbon cable
into the Expansion Output port on the
back of the Master device. Plug the other
end into the Expansion Input port on the
back of the first slave device.
3.
Slide the Master/Slave switch on the first
slave device to the Slave 1 position.
4.
If connecting a third device, plug one end
of the included ribbon cable into the
Expansion Output port on the back of the
first slave device. Plug the other end into
the Expansion Input port on the back of
the second slave device.
5.
Slide the Master/Slave switch on the
second slave device to the Slave 2
position.
Master/Slave
select