EZER EDR 9000, Operation Manual

Page: 23 / 118

21
4.5 Ho w to in s ta ll EDR- 9 0 0 0
Follow the below directions to install the most basic system.
1) Check out whether all the basic components are.
2) Connect the Ref. Body to the Junction Box by 8 pins cable. The Junction Box must be powered
off.
3) Connect the Operation Panel to the Junction Box by 10 pins cable.
4) Conncet ECP-5400. Refer to the article 5.1 to see the process.
5) Connect ERK-9000. Refer to the article 5.2 to see the process.
6) Connect the power cable of the Junction Box and then check out whether all cables are
connected properly.
7) Power on ECP-5400.
8) Power on ERK-9000.
9) Power on the Junction Box.
10) After power on, the Ref. Body gets initialized, and the Logo comes out on the LCD screen of the
Operation Panel. And then, the initializing screen appears on time.
11) Start vision test after initialization of the Ref. Body and the Operation Panel.
12) Please refer to the chapter 7~9 for various options for the test and its applications.
[Figure 4-11] EDR-9000 Connection Diagram
Digital Refractor EDR-9000