
Page 4
TRANSPORT SAFETY CONTINUED:
5. When transporting the disc with the wings folded (UP), be sure there is sufficient clearance under all power lines and other overhead obstructions.
Serious injury or death can result from contact with electrical lines. Use care to avoid contact with electrical lines when moving or operating the
disc. Refer to specification chart on page 5 for approximate transport height for your machine.
6. Always attach a safety chain to the tractor drawbar and the
disc hitch before transporting the disc. The safety chain will
help control disc should it accidently separate from the
drawbar. Use a chain with a strength rating greater than the
gross weight of the towed machine. Serious damage and
injury could result from the disc separating from the tractor
drawbar.
7. Check all reflectors and visibility and cleanliness before transporting the disc. It is important that the reflectors are clean and visible, especially
during the evening hours.
8. Regulate your speed on hillsides and curves when transporting
the disc. Loss of tractor control could result in serious damage
to the disc and possible serious injury or death to you or
person(s) nearby.
9. Never allow anyone to ride on drawbar of the tractor or on the disc. The person riding may fall and be seriously injured.
OPERATION SAFETY
1. Be sure person(s) are standing clear before starting or moving the tractor and disc.
2. Only one (1) person (the operator) should be permitted on the tractor when the disc is in operation, and he/she should be familiar with repair
procedures and temporary first aid treatment.
3. Never stand between the tractor and disc when hitching disc to the tractor UNLESS all tractor controls are in neutral and the park brake is set.
The tractor could roll backwards which could result in serious injury or death to you or persons nearby.
4. When operating on hillsides, use extreme care. The tractor may tip over if it strikes a hole, ditch or other irregularity.
5. To avoid personal injury or death, always stay clear of the folding wings when they are being raised, lowered or in the folded position. If the
hydraulic system failed, or if the hydraulic lever was accidentally operated, the wings could drop, resulting in serious injury or death to you or
person(s) nearby.
6. Do not stand under wing while wing is being raised or lowered. If any components of hydraulic system should fail, or if hydraulic lever should
accidentally be operated, wing could drop causing serious injury or death .
7. Always relieve the pressure in hydraulic system and close both hydraulic lockup valves when the disc is not being used.
SAFETY DECALS
1. Keep all decals clean and in good condition to provide you with a constant reminder of safe operating procedures.
2. Replace any destroyed, missing or illegible decals.
STORAGE
1. Wings may unfold due to thermal expansion of hydraulic oil causing damage to disc, property or severe injury or death to person(s) nearby.
Release pressure in all cylinders then close hydraulic lockup valves before unhitching from tractor or when parking with tractor.
Summary of Contents for 4600 DISC
