Ezee-On 1225 Owner'S Manual Download Page 97

Page: 97 / 133

GENERAL OPERATING INSTRUCTIONS cont.

CAUTION: WHEN TRANSPORTING THE DISC OVER PUBLIC ROADS OR HIGHWAYS, ALWAYS CHECK LOCAL LAWS REGARDING WIDTH,

HEIGHT AND WEIGHT RESTRICTIONS.

WARNING: BE SURE ALL AMBER AND RED LIGHTS ARE WORKING TO SAFEGUARD AGAINST REAR END COLLISIONS. DAYBREAK

AND DUSK ARE PARTICULARLY DANGEROUS.

WARNING: NEVER ALLOW ANYONE TO RIDE ON DRAWBAR OF THE TRACTOR OR ON THE DISC. THE PERSON RIDING MAY FALL AND

SERIOUSLY

INJURED.

WARNING: ALWAYS LOWER THE DISC TO THE GROUND WHEN SERVICING OR MAKING ADJUSTMENTS. IF THE DISC MUST BE

SERVICED OR ADJUSTED IN THE RAISED POSITION, MAKE SURE FRAME IS ADEQUATELY BLOCKED. DO NOT RELY ON

HYDRAULIC LOCK-UP VALVES AS A SAFETY DEVICE. IF ANY COMPONENT OF THE HYDRAULIC SYSTEM FAILED, OR IF THE

HYDRAULIC LEVER WAS ACCIDENTALLY OPERATED, THE DISC COULD DROP SUDDENLY.

14.

VERY IMPORTANT:

WHEN PARKING OR STORING DISC, ALWAYS RELIEVE PRESSURE IN HYDRAULIC CYLINDERS. HYDRAULIC CYLINDER
OR OTHER COMPONENTS COULD FAIL IF THERMAL EXPANSION OF HYDRAULIC OIL TAKES PLACE DUE TO WARM
WEATHER OR IF DISC IS STORED IN HEATED BUILDING.

Page 13

Summary of Contents for 1225






































































































































Search results

Summary of Contents for 1225

Reviews:

Related manuals for 1225

Brands by name

Popular brands

Ezee-On 1225, Owner'S Manual

Search results

Summary of Contents for 1225

Reviews:

Related manuals for 1225

Brands by name

Popular brands