23
Charging the Battery
•
Use available standard alternating current (AC 110-220 V, 50-60 Hz)
for charging, the charging socket is in front/lower section of the
joystick.
•
Make sure that the power is off before charging.
•
Insert the charging plug of the charger into the charging port in the
lower front of the joystick to charge on the chair. To charge the
batteries off-chair plug the charger directly into the battery.
•
Plug the charge into the wall socket and the red light will glow to
show it’s charging.
•
After the charger indicator light change from red to green, keep
charging for 30 minutes, so as to ensure a full charge.
Unplug the external power supply socket of the charger
first, then unplug the socket out of the joystick.
•
When two batteries are installed, they are connected,
they output power at same time and run out at same
time. When charged through the joystick they will charge
at the same time.
•
Do not use the battery in extreme hot or cold
environments.
