41
Should you decide to carry out your own work on a Nexus hub you may cause
damage to gears not covered by warranty, causing them to fail.
Before riding always make sure that your tyres are inflated to the correct PSI
stated on the wall of the tyre, that there are no bulges, and no excessive wear.
Recommended tyre and pressure/inflation check should be once a week.
Installation and adjustment of rear Nexus hub
We wouldn’t recommend any work being carried out on these wheels unless by a fully qualified cycle
mechanic.
Tyre Inflation
Your tyres are specifically designed for the extra strength required for electric bicycles. The wall of your
tyre will tell you what PSI it should be inflated to, which direction it should rotate, and it’s size, make and
model number.
Inside the tyre is your inner tube, which is fitted with a Presta (French style) valve. Before you are able to
inflate these you will need to remove the dust cap and loosen the acorn nut. Remember to re-tighten
this and replace the dust cap when your tyre is inflated or you could gradually lose air pressure.
41
41