1.
Check all bolts to ensure they are tight.
Remove covers as necessary for inspection.
2.
Check arm to mast pivot bolt
by removing plastic cap to assure nut is tight and cotter pin
is in place. If plastic cap is missing order replacement.
3.
Foot platform assembly pins need to checked to assure
they have not pushed in and still engage into base.
4.
Check bolts on back of shin pad.
4.
Safety tabs need to be checked
to make sure they are installed correctly, not missing or torn.
PIN ON FOOT
PLATFORM
ARM TO MAST
BASE PIVOT REAR WHEEL FRONT WHEEL LINKAGE SPREADER
EZ Way Smart Stand
®
Safety
&
Maintenance Checklist
EZ Way, Inc.
The EZ Way Smart Stand
®
requires a minimum of servicing to keep it in good working order. Nevertheless, it is
important that certain basic checks be periodically made by maintenance staff to ensure on-going safety throughout the
life of the device.
The manufacturer suggests that the following components and operating points be scheduled for inspection at intervals
not greater than six months. Any detected deficiency must be rectified before the stand is put back into service.
☐
☐
☐
☐
1
2
3
4
☐
5