7
Shower System Operation
The patient shower includes a handle (11) located
on the right side on the panel, the thermoscopic
mixer (2) and a shut-off valve (9) on the front of
the control panel. The handle nozzle has a rubber
strainer which is easy to clean, just rub your thumb
over the strainer.
Using the Shower
1.
Lift the shower handle (11) and hold it over the
tub, away from patient.
2.
Turn valve (9) to “ON” position for patient
shower.
3.
Set the thermoscopic mixer (2) to desired
temperature.
4.
Physically test water temperature and adjust
thermoscopic mixer (2) to suit. Adjust water
flow with shutoff valve (9) located on front of
control panel.
5.
Shower or rinse patient with shower handle.
6.
After showering, turn valve (9) to “OFF”
position and return handle (11) to its bracket
(12).
The patient shower system is also useful for rinsing
residue and debris from tub when cleaning (see
cleaning system description).
Please note: Shower handle should not be held in
the bath water while bathing.
Whirlpool
The shower hose shall be used when flushing the
whirlpool system, see separate description.
Summary of Contents for EZ 900 Series
Page 19: ...19 Wiring Diagram...
Page 20: ...Wiring Diagram 20...