EZ outboard EZ-05T/R, User Manual

Page: 18 / 22

All rights reserved Golden Motor Technology Co., Ltd. 2018
15
15
4 Storage and Maintenance
4.1 Storing outboard motor
When storing your outboard motor for
prolonged periods of time (2 months or
longer), several important procedures must be
performed to prevent excessive damage. It is
advisable to have your outboard motor
serviced by an authorized dealer prior to
storage. However, you the owner with a
minimum of tools, can perform the following
procedures.
• After use, the motor should as a general rule,
be taken out of the water. You can do this using
the tilt mechanism of the transom bracket.
• The connector plug and main switch must be
protected from moisture.
• Rinse the motor with fresh water after
operation in salt water or brackish water.
• Only store the motor in a dry,well-ventilated
place, not in direct sunlight.
• The threads of the transom mounting bolts
need to be re lubricated regularly with marine
grease (e.g. LiquiMoly)
4.2 Replacement parts
EZ gear-less and shaft-less design makes it
very unique, quiet, reliable, efficient and less
vibration. The new design also takes
consideration of compatibility of installation,
teleflex remote control and exchangeable
propellers with ordinary gasoline outboards.
The BLDC motors are optimally tuned for
electric outboards with motor speeds
(2000rpm-2500rpm) matching to common
propellers without speed reduction gears, so
you can get the same boat speeds as by
gasoline outboards with similar horse powers.
If replacement parts are necessary, use only
genuine outboard parts or parts of equivalent
design and quality. Any part of inferior quality
may malfunction, and the resulting loss of
control could endanger the operator and
passengers. Outboard genuine parts and
accessories are available from your dealer.