15
Use ▲or▼ to select
2.10 Set Capacity Threshold
The difference between actual capacity and labeled capacity of flash media is allowed and
the threshold can be set up in 3 steps.
Capacity:
Set up labeled capacity from 32MB to 2TB, Depend on Source, and OFF.
Use ▲or▼ to select
Unit:
You can choose the unit of
1M=1000K or 1M=1024K.
Tolerance:
Set up the tolerance ratio for the difference between actual and labeled capacity,
ranging from 0 to 50%.
2.11 Set Error Active
This is the setting to stop or continue the test when any of the testing conditions (such as
Capacity Threshold or Bad Sector Ratio) is failed to meet.
Use ▲or▼ to select
2.12 Set Format Type
[Quality Check]
9. Set Speed Threshold
[Set Speed Threshold]
Read: 35MB/s
ENT
[Quality Check]
10.Set Capacity Threshold
[Quality Check]
Capacity
: 8G
ENT
ENT
[Quality Check]
1M = 1000K
[Quality Check]
11. Set Error Active
[Set Error Active]
Stop Test
ENT
ENT
[Quality Check]
Upper Range: 10%
ENT
[Quality Check]
Lower Range: 5%
