14
2.5 Set Test Range %
Set up the testing range. It can be set from 1% to 100%.
Use ▲or▼ to select
2.6 Set Test Range MB
Set up testing range. It can be set from 1MB to 9000MB. Both 2.6 & 2.7 are for setting test
range, the last setting works. For example, when you set Test range=10% then set 100MB,
the test range is 100MB. When you set 10% again, the test range is 10%.
Use ▲or▼ to select
2.7 Set Bad Sector Ratio
Set up tolerance ratio of bad sector for flash media testing, from 0.01% to 50% or OFF.
Use ▲or▼ to select
2.8 Set Bad Sector Size
Set up tolerance size of bad sector for flash media testing, from 0MB to 9999MB or OFF.
Both 2.8 & 2.9 are for tolerance of bad sector, the last setting works.
Use ▲or▼ to select
2.9 Set Speed Threshold
Set up minimum Read and Write speed for flash media testing, ranging from 0.5 MB/S to 35
MB/S or OFF.
[Quality Check]
5. Set Test Range
[Set Test Range]
100%
ENT
[Quality Check]
7. Set Bad Sector Ratio
[Set Bad Sector Ratio]
10%
[Quality Check]
6. Set Test Range
[Set Test Range]
100 MB
ENT
[Quality Check]
8. Set Bad Sector Size
[Quality Check]
[Set Bad Sector Ratio]
Below:9999M
[Set Bad Sector Ratio]
ENT
