Page | 9
7.
ATTACH PANEL FRAME TO WALL BRACKET
7.1.
Using 2-each 5/16"-18 X 1" hex bolts, 4-each flat washers (1 under each bolt and one under each nut), and
2-each nylon insert locknuts, reattach panel frame to wall bracket using the uppermost and lowermost
holes (FIG. 7.1).
Always have 2 panel frame to wall bracket connection points.
7.2.
Tighten all fasteners securely.
7.3.
Anchor base plates
(see ‘SECTION 10’ for anchoring instructions).
Failure to anchor base plates immediately after assembly of panel frame to wall bracket could
result in a hazardous situation.
Securely anchor the base plates and wall brackets and keep anchored during use. Misused or
unanchored partition can fall over and cause serious injury or death.
FIG. 7.1
Summary of Contents for Portable Partition
Page 7: ...Page 7 FIG 6 3 FIG 6 4 ...
