Page | 10
8.
TRIM/CUT PANEL WIDTHS
8.1.
The panel tubes and vinyl panel come in a
standard width of 72”. If trimming is needed
to obtain a
narrower width, the panel tubes and vinyl panel can be cut to the desired width (FIG. 8.1).
8.2.
If assembled, disassemble the panel frame and remove panel tubes from vinyl panel.
Do not trim while partition is assembled; always disassemble before trimming.
8.3.
Lay vinyl panel flat on a surface that will not be harmed by your chosen trimming process.
8.3.1.
Mark and trim vinyl as needed.
8.4.
Mark and cut panel tubes as needed.
8.4.1.
Using a metal file, remove any sharp edges from cut tubes.
8.5.
Insert a provided threaded insert into the cut end of each tube. Use a rubber mallet to fully seat.
8.6.
Return to
‘SECTION
4
’ and
complete steps 4.2 through 4.4.
FIG. 8.1
Summary of Contents for Portable Partition
Page 7: ...Page 7 FIG 6 3 FIG 6 4 ...
