Page | 3
1.
GETTING STARTED
1.1.
Read this instruction manual in its entirety before use and follow all instructions before and during use.
1.2.
Confirm that all components are present and inspect the shipment for damaged or missing parts. If
damaged or missing parts are noted, do not install or use the hanging partition.
1.3.
Before each use, check the hanging partition for worn, loose, missing, unstable, or damaged parts. If you find
any of these conditions, do not use until repairs have been made. Consult with a professional contractor if
you need assistance or additional information.
2.
COMPONENTS
Typical system components are shown below (not to scale). Components may vary depending on configuration.
Mounting/hanging hardware is not included.
TUBE SUPPORT FLAT BAR
PANEL TUBE (W/ THREADED INSERTS)
VINYL PANEL (SHOWN W/ PANEL TUBES)
THREADED INSERT
HEX BOLT
(5/16” –
18 x 1”)
FLAT WASHER
(5/16” x 7/8”)
3.
LABELS
The hanging partition has warning and brand labels. Though always positioned on the flat bar (FIG. 3.1), labels may
vary in placement, color, size, and written content. Note that labels face outward, away from vinyl panel.
Maintaining all labels in legible condition is required and is essential for safe operation. For replacement
copies, call 1-800-258-8503.
FIG. 3.1
