EYE-LCD-5500-LHD
39
39
Troubleshooting
Before calling service personnel, please check the following chart for a possible cause to the trouble you are
experiencing.
Perform the adjustments according to page 13 “Operation The Monitor”
If the problem you have experienced isn’t described below or you can’t correct the problem, stop using the
monitor and call service personnel or your dealer.
Problem
Check these things
No Display
Ensure the power plug is installed correctly on both ends.
Check the main power switch is set to “—“
Check that source equipment is operating correctly.
Check the input signal is compatible with this display.
The image is not centered
Check the input signal is compatible with this display.
The image is not locked correctly
Check the input signal is compatible with this display.
The remote control doesn’t work
Make sure the batteries fresh and are installed correctly.
Ensure the remote is aimed at the IR sensor on the front of the display
The picture color looks poor
Check the picture settings.
Reset the display.
If you are using YUV terminals, make sure cables are correctly
connected.
Compliance
FCC Compliance Statement:
FCC
：
FCC CFR Title 47 Part 15 Subpart B:2009 Class B, CISPR 22:2008
ANSI C63.4: 2003
CE
EN 55022:2006+A1: 2007
EN 55024: 1998+A1: 2001+A2: 2003
EN 61000-3-2: 2006
EN 61000-3-3: 1995+ A1: 2001+A2: 2005
