User’s guide – CLASSIC DOG FENCE/DELUXE FENCE receiver collar – indice B
3/16
●
Contents of the product
-
1 collar fitted with short contact points
-
1 neon test lamp
-
1 nylon strap
-
1 pair of long contact points
-
1 lithium 3-V CR2 battery
-
this user’s guide
-
1 magnetic key (magnet)
●
Presentation of the product
●
Fitting the battery in the receiver collar
Unscrew the 4 screws of the battery cover using a screwdriver.
Insert the battery (3V Lithium CR2)
paying attention to follow
polarity indicated on the battery housing
.
A beep sound is emitted indicating the correct installation of the
battery. If you do not hear any beep sound after having inserted the
battery, remove it immediately from its housing. Check the polarity
before trying again.
Before putting the lid back in place, check that the rubber seal is in its
groove.
Retighten moderately the 4 screws.
●
Activate/deactivate the receiver collar
The supplied magnetic key allows you to activate/deactivate the collar.
▪
Activate
: move the magnetic key towards the collar so that it comes into contact with the
symbol located on the collar, hold for 1
second (ref. Diagram 3). The collar will emit one beep sound and the indicator light will flash in green indicating
the collar is On
.
▪
Deactivate
: move the magnetic key towards the collar so that it comes into contact with the
symbol located on the collar, hold for 1
second (ref. Diagram 3). The collar will emit two beep sounds and the indicator light will flash in red then go out indicating
the collar is Off
.
Diagram 1
Nylon strap
Contact points
(short or long)
Indicator light:
On/Off indicator
+
battery level indicator
symbol:
area where the switch magnet is located
This magnet allows you to switch On/Off the
collar and to select the level of static
correction
Magnetic key
(magnet)
Diagram 2
Battery polarity indicators
Battery
Seal
