Eyemax Triplex MPEG-4 DVR 9/16CH User Manual Download Page 41

Page: 41 / 85

Digital Video Recorder

User Guide

- 41 -

5.5 NET CLIENT ID

Figure 4-47

ID and password for the network are given up to 4 to avoid the system overload due to excessive

connection on RMS and it intercepts the connection of unregistered ID. ID and password that are

registered on the system should be typed in to connect the RMS.

For the registration, place the cursor on each blank and push the SEL button to see the character

arrangement. Select the characters to type in.

5.6 NETWORK BANDWIDTH

This chapter is for configuring Network Bandwidth connected to DVR and controlling the transferring

Video and Audio relate to Network Bandwidth. As a result of this option, it can save Network bandwidth

between Remote client connection and DVR.

Figure 4-48

It can be set up to UNLIMITED, 64KBPS, 128KBPS, 256KBPS, 512KBPS, 1MBPS, 2MBPS, 4MBPS,

10MBPS like Figure 4-48. UNLIMITED means that no BANDWIDTH selection for specific configuration.

Regarding Network Client, Users feel that low throughput(64KBPS) is transferring data slowly, and high

throughput(10MBPS) is transferring data more faster.

Summary of Contents for Triplex MPEG-4 DVR 9/16CH






















































































Search results

Summary of Contents for Triplex MPEG-4 DVR 9/16CH

Reviews:

Related manuals for Triplex MPEG-4 DVR 9/16CH

Brands by name

Popular brands

Eyemax Triplex MPEG-4 DVR 9/16CH, User Manual

Search results

Summary of Contents for Triplex MPEG-4 DVR 9/16CH

Reviews:

Related manuals for Triplex MPEG-4 DVR 9/16CH

Brands by name

Popular brands