background image

Digital Video Recorder

 User Guide 

 

 

- 38 -

 

                                                                                                                            Figure 4-41 

5.1.2 DYNAMIC

 

When the DYNAMIC is selected on the Figure 4-40, users automatically get the IP ADDRESS through the 

connected network and the indication of PLEASE WAIT is shown during the acquiring the IP ADDRESS. 

Figure 4-42 shows the screen after the DYNAMIC is selected.   

 

                                                                                                                    Figure 4-42 

 

5.1.3 PPPOE

 

It is the network that uses the Internet service from Internet service providers (ISP).   Users can connect 

the network by typing in the ID and password that are authenticated to users by ISP.     

Figure 4-43 shows the progress of authentication registration for PPPOE.    Place the cursor on the blank 

and push the SEL button to see the character arrangement.    And then, select the characters to type in 

the ID and password

.

 

Summary of Contents for Triplex MPEG-4 DVR 9/16CH






















































































Reviews: