Eyemax THR04 User Manual Download

Page: 21 / 80

SER

’

ANUAL

H.264

EAL

IME

DVR

③

[Channel selection]



Selected channel shows red rectangle on the edge of the screen.



Press “OK” button on the remote controller to enlarge selected channel.

④

[Live view]



It shows current live view as real time.

⑤

[System control toolbar – Live screen]

Notice: To hide live toolbar do right mouse click on the screen or press “live” button

on the remote controller.

[Setup]



Click

button to enter setting menu



Refer to Chapter “2-3 System setting”.

[Search]



Click

button to enter search screen.



Refer to Chapter “2-5 Search (playback) & backup”.

[Divided screen selection]



1/4 divided screen can be displayed in live view.

[

Auto sequential]



Click

button and each channel will be switched automatically.



This function does not work at 4 divided screens.



You can set the switching interval at [Setup]



[System]



[Overview]



[Auto-

switching].

[

PTZ control

]



This is the button to control the PTZ camera



Refer to Chapter “2-4 PTZ control”.

[

Alarm on/off

]



This button is used to turn on/off the alarm output

Summary of Contents for THR04

















































































Search results

Summary of Contents for THR04

Reviews:

Related manuals for THR04

Brands by name

Popular brands

Eyemax THR04, User Manual

Search results

Summary of Contents for THR04

Reviews:

Related manuals for THR04

Brands by name

Popular brands