20
CH 1 Product Introduction
9. SPOT
7. DC12V
13. AUDIO OUT
14. SENSOR IN / RS485, ALARM OUT
2.VIDEO IN
10. LAN
3. e-SATA
5. VGA
4.HDMI
8. POWER SWITCH
12. EXTEND
11. RS232C
1. AUDIO IN
6. USB
<HYBRID 08R>
[Rear Panel]
1. AUDIO IN
: RCA audio in terminals. You can record 8 channels at the same
time.
2. VIDEO IN
: This receives images from cameras and sends them to monitors.
3. e-SATA
4. HDMI
: Real HD(1920X1080) output for high resolution monitor
5. VGA
: video output for VGA display
6. USB
: This USB port is for mouse and USB devices.
7. DC 12V
: DC12V 12.5A or up
8. Power Switch(ON/OFF)
9. SPOT
: For spot CRT monitor, composite signal comes out.
10. LAN
: This is the Gigabit Ethernet LAN cable connection terminal.
11. RS232C
: This is Serial communication(RS232C) cable connection terminal.
12. EXTEND (option)
: Connect EXTEND FTP cable to VGA or HDMI Receiver
13. AUDIO OUT
: RCA audio out terminal.
14. SENSOR IN
: This terminals can be connected to external sensors.
RELAY
: This terminal blocks connect external electric devices to the product
(Warning Lamp and others).
RS485
: For control the pan and tile cameras. Make sure that the polarity.
v
For more details, refer to [CH 2. Installation Method and Cautions].