Eyemax HD4K-1.0(A01) User Manual Download Page 70

Page: 70 / 84

the mouse, double click.

4. The NVR starts the playback mode, displaying all channels. Any channel

number or the DISPLAY button may be pressed to change the display mode.

2.2 Preview Search (Single Channel Playback)

The NVR allows you to quickly review a single channel of playback over a period of Day,

Hour, and Minute.

1. Press the

[Time Search]

button to access the time search table. Day will be

displayed.

Choose the desired channel to review by pressing a numeric button or Click Channel

number on the left.

Return button to chart.

Use the

[+]

button to navigate to the desired

Day



Hour



Minute (5min)



Minute

(30sec)

. Use

the

[-]

button to go back Minute (30sec)



Minute (5min)



Hour



Day.

When using the mouse, the wheel is used for [+/-] button.

While reviewing snapshot, use numeric buttons to review other channel.

Channel

Day, Hour, Minute

Summary of Contents for HD4K-1.0(A01)





















































































Search results

Summary of Contents for HD4K-1.0(A01)

Reviews:

Related manuals for HD4K-1.0(A01)

Brands by name

Popular brands

Eyemax HD4K-1.0(A01), User Manual

Search results

Summary of Contents for HD4K-1.0(A01)

Reviews:

Related manuals for HD4K-1.0(A01)

Brands by name

Popular brands