Eyemax HD4K-1.0(A01) User Manual Download Page 16

Page: 16 / 84

4. Mouse Control

This IP NVR can be controlled by the mouse. Connect

the mouse to the USB port before use.

Left-Button

-Double Click on any channel to enlarge

to full screen while in a split-screen display mode and

double click again to return.

Select the menu option while navigating through various

menu options.

Right Button

- Right click anywhere on the screen to

open main menu. Double click to return.

Scroll Wheel:

move the scroll wheel up or down to increase/decrease the value of the

selected menu option.

5. Virtual Keyboard for Mouse Control

This system provides a virtual on-screen keyboard to perform the control by mouse.

Connect a mouse via USB port before use.

<Virtual Keyboard>

Summary of Contents for HD4K-1.0(A01)





















































































Search results

Summary of Contents for HD4K-1.0(A01)

Reviews:

Related manuals for HD4K-1.0(A01)

Brands by name

Popular brands

Eyemax HD4K-1.0(A01), User Manual

Search results

Summary of Contents for HD4K-1.0(A01)

Reviews:

Related manuals for HD4K-1.0(A01)

Brands by name

Popular brands