Eyemax HD4K-1.0(A01) User Manual Download Page 28

Page: 28 / 84

1.2. SWITCH Setup (Monitor Configure)

The menus are displayed with options on the left-hand column and settings in the right hand

column. A cursor (highlighted menu) can be moved using the Direction buttons [

] .

1. Settings

1) Device: It is set by Main monitor .

2) Dwell Time: Select the interval that each camera or Multi screen mode is displayed in

a rotation. Use

[-, +]

button to change :

[1 second ~ 30 second]

3) Mode:

Select the appropriate monitor display to making any adjustment. This Mode

will be activated while it’s in Switch Mode.

Sequence:

Automatic Sequence.

Shift:

Selected camera will be displayed after dwell time.

Event

: To display particular camera in full screen or in multi mode when event

triggered.

4) SPLIT MODE : Select desired sequence mode to switching.

5) USE CHANNEL: Select the cameras to be inclcuded or excluded from the automatic

Summary of Contents for HD4K-1.0(A01)





















































































Search results

Summary of Contents for HD4K-1.0(A01)

Reviews:

Related manuals for HD4K-1.0(A01)

Brands by name

Popular brands

Eyemax HD4K-1.0(A01), User Manual

Search results

Summary of Contents for HD4K-1.0(A01)

Reviews:

Related manuals for HD4K-1.0(A01)

Brands by name

Popular brands