EYELA A-1116A, Instruction Manual

Page: 35 / 37

When disposing the product, please follow the instructions as below.
Disposal of the product 9
Main components and disposal instructions
＊
Confirm the type and amount of Teflon by referring to the serial number plate attached to the product body.
＊
Dispose packing materials by separating each type of material.
Component Specification
Total
weight
Dimensions Method for disposing
Main unit of low
temperature
circulator
CA-1116A
Approx.
43kg 354(W)
×
384(D)
×
851(H)m
m
Contact waste disposer
Refrigerating Freon
gas to be charged in
the refrigerator
＿＿ ＿＿＿＿＿＿＿＿＿＿＿
For disposing Freon gas,
contact waste disposer.
- 30 -
Material of main parts
Main component Main part Main component part Main material
Main unit Package Package plate Zinc electroplating plywood
（
SECC,SEHC
）
Bath Stainless
（
SUS304
）
Caster
Cold-reduced carbon steel ,Nylon
（
SPCC,PA6
）
Ventilation cover Zinc electroplating plywood
（
SECC
）
Control panel Zinc electroplating plywood
（
SECC
）
Membrane sheet Polyethylene terephthalate (PET)
Corner of front top Acrylonitrile -Butadiene -Styrene
（
ABS
）
Screws Stainless
Cooling cycle part Refrigeration unit
Steel
（
Fe
）、
Copper
（
Cu
）、
Electromagnetic
steel plate
Condenser
Aluminum
（
Al
）、
copper pipe for air
conditioning refrigerant
（
CUT
）、
Zinc
electroplating plywood
Evaporator
（
Cooling coil
）
Stainless(SUS316L)
Pipes copper pipe for air conditioning refrigerant (CUT)
Insulation material for pipe Ethylene
・
Propylene rubber
（
EPDM
）
Water circulating
system
Circulation pump
Polyphenylene ether
（
PPO
）、
ceramic
、
high
density carbon, isotropic ferrite,Steel
Pipes Silicon
（
tube
）、
POM
（
joint
）
Insulation material for pipe Ethylene
・
Propylene rubber
（
EPDM
）
Heat insulator for
bath
Styrene foam
Electrical part Basal plate condenser, relay Glass epoxy resin, steel, copper
Switch, residual current device Polyester resin, steel, copper
Power cord, wires , Inlet Vinyl, soft copper,Nylon(PA6)
Fan for refrigeration unit Aluminum
（
Al
）
Insulation film , Nylon clamp
Polyethylene terephthalate
（
PET
）
, Polyamide
（
PA66
）
Motor Zinc alloy
（
ZDC
）
, brass
Bath cover Acrylonitrile -Butadiene -Styrene
（
ABS
）
Nozzle’s tray elastomer
Circulating Valve , Nozzle, Elbow Brass _PTFE _ABS_ Steel , Brass , SUS304
Air filter Polyurethane
（
PUR
）
Drainage plug Drain , tray Polyacetal
（
POM
）
, polyethylene (PE)