When using the unit as a low temperature bath,
connect bypass hose to both WATER-OUT and
IN nozzle. If you should turn on circulation pump
in this status, the bath will be stirred, which
makes cooling efficiency worse. Fix the hose
band tightly (hose and hose band is not supplied
with the product).
Using the unit as a low temperature bath
2. Connecting drainage hose for tray
Remove the stopcock of drainage hose for tray
and set the vessel for receiving the drained water.
When the condensation is built up so often or
humidity is so high, tray will receive more
quantity of water. So check the tray regularly
and drain the water especially in the summer time.
＊
The vessel for receiving drain water is
not supplied with this unit.
13
Drainage hose
for tray
Waste plug
for tray
Bypass hose
（
3
）
Connect hose (Bore diameter: 9mm) to WATER-
OUT nozzle, WATER-IN nozzle and the device
that to be cooled down (sealed type). Fix the hose
with hose band (Hose and hose band is not
supplied with the product). Choose the hose that
can resist the solvents that has appropriate
pressure and heat resistance.
CAUTION
When you circulate a low temperature liquid,
please connect it with the hose which did an
insulation for prevention of dew condensation
and frostbite.
In any case, please fix it in a hose band
so that a hose does not fall out .
※
Cold insulation hose is a consumable product.
Life of the hose differs depending on the use
condition, so please check it regularly and
replace it with new one if needed.
