Eye3WitnessView BodyCam User Manual
This document contains proprietary and copyrighted information subject to change without notice. The information in this document
shall not be duplicated, used, or disclosed in whole or in part outside of Eye3Data © 2012. Any distribution of this material without
the written consent of Eye3Data is strictly prohibited.
7
OTHERS
Password protection
Requires admin password to allow video deletion
Pre-record function
5 seconds pre-record.
Post-record function
5 seconds last-record
Burst
1/3/5 Shot burst picture taking
Dimensions
94 mm *61 mm
*31mm (2.91” * 1.83” *0.93”)
Weight
175g (6.17oz)
Working Temperature
-40
～
60 degrees Celsius
Storage temperature
-20
～
55 degrees Celsius
ACCESSORIES
Standard Accessories
USB cable, Charger, Driver CD, Universal metal clip
Optional
GPS, External Camera, 2-ways Radios cable
3. Getting Started
1)
Press and hold the “Power” button
(located on the bottom of the right side of the device)
for about 3 seconds, the user will hear a “click” sound and feel the unit vibrate. A green
indicator light on top of the unit will turn on and remain green while the unit is powered on.
The camera and LCD monitor will turn on and enter into a standby mode. The video
preview mode is displayed on the LCD monitor.
2)
The video preview mode displays: recording time, camera resolution, battery indicator,
device id, storage capacity, and camera view.
3)
Press and hold the “Power” button for about 3 seconds, the camera will turn off. The user
will hear a “click” sound and feel the unit vibrate before it powers off. The green
indicator light will also turn off.
4)
If there is no user interaction within 3 minutes of being turned on, the camera will
automatically turn off and enter into a power saving mode. The green indicator light will
remain on.
