EYC DPME02, Operation Manual

Page: 7 / 26

www.eyc-tech.com
7
dead cavity is easy to be formed in the sensor, resulting in measurement error. It
should be installed according to figure B(go deep into the water direction=FLOW)
A Wrong installation B correctly installed
(2) The installation mode of A will lead to the formation of the air cavity in the
conductivity cell, resulting in measurement errors and instability, and should be
installed as shown in figure B.
A Wrong installation B The small round hole of the
conductivity cell is located in
the water outlet window.
(3) Other common wrong installation methods
：