www.eyc-tech.com
22
After entering the calibration interface, the current output value will be displayed on
the screen. The ammeter will measure the output current value of the current 1 and
adjust the current value on the screen to be the same as the current value measured by
the ammeter.
Menu 3.3.3 Electric current 1 ... 20 mA correction
The setting principle of 20 mA is the same as that of 4 mA. Please refer to 4 mA for
correction.
Menu 3.4 Electric current 2
The setting principle of current 2 is the same as that of current 1. Please refer to
current 1.
5.4 Factory reset
Menu 4.1 Setting recovery
Press Enter to confirm, all the parameter settings of the meter will be restored to the
default value.
Menu 4.2 Alarm recovery
After pressing Enter key, the alarm information of the meter will be cleared.
Summary of Contents for DPME02
Page 1: ......
Page 26: ...www eyc tech com 26...
