kBox4 Manual v10.0.1
Introduction
10
Flywheel Protection
Foot Block
The flywheel protection should be assembled after
unpacking the kBox.
This is highly recommended in order to protect against injury. First
remove the plastic film, then bend and hook the cover under the
bottom of the kBox and then in the holes in the front of the chassis.
See pictures below.
The foot block can be positioned straight or at an angle
and is secured by sliding the pins into the holes in the front
and the back of the kBox chassis.
The angle, along with the rubber mat, will provide extra friction and
stability for your foot when performing lateral movements. The foot
block can also be turned around so the side without the rubber
mat is facing inwards. This can be usefull as a guide to help keep
your foot placement consitent for vertical movements.
