extronics iTAG 100, Operating Manual

Page: 9 / 22

Operating Manual
9
4.4 Safety Precautions
Important For the installation, maintenance and cleaning of the units, it is
absolutely necessary to observe the applicable regulations and
provisions concerned with explosion protection (EN 50014, EN 50020) as
well as the Accident Prevention Regulations.
4.5 Cleaning and Maintenance Intervals
The cleaning intervals depends on the environment where the system is installed.
4.6 Aggressive substances and environments
The iTAG100 is not designed to come into contact with aggressive substances or
environments, please be aware that additional protection may be required.
4.7 Exposure to external stresses
The iTAG100 is not designed to be subjected to excessive stresses e.g. vibration,
heat, impact. Additional protection is required to protect against these external
stresses.
The iTAG100 will require additional protection if it is installed in a location where it
may be subjected to damage.