Extronics Limited
1 Dalton Way, Midpoint 18, Middlewich, Cheshire, UK. CW10 0HU
Tel:
+44 (0) 845 277 5000
Fax:
+44 (0)845 277 4000
E-mail:
Web:
13
5.2
Using the base station in hazardous areas (assembly 1)
The device has been closed ex-factory.
Incorrect handling may result in the termination of the operating
permit.
The cable connecting the base charging station to the power supply is
iSCAN2XXCAB5, 6, 7, 8, 9 or 10.
Insert the cable in the opening at the bottom of the base charging
station.
If the cable has been inserted fully you can hear a "click".
Check if the cable fits firmly.
Insert the plug of the connection cable into the power supply's plug
connector.
Ensure that the connection is fully secured with the screw
cap after the plug has been inserted.
Place the Bluetooth
handheld scanner onto the charging station.
Insert the lower part of the handle to ensure that the contacts for
charging are connected properly.
The LED at the head of the scanner will come on to
indicate successful charging.
