Extronics Limited
1 Dalton Way, Midpoint 18, Middlewich, Cheshire, UK. CW10 0HU
Tel:
+44 (0) 845 277 5000
Fax:
+44 (0)845 277 4000
E-mail:
Web:
14
5.3
Using the base station in non-hazardous areas (assembly 2)
Charge the handheld scanner in the safe area with a non-
explosion-protected base charging station.
Use a safe area power supply for supply to the base charging
station.
The cable is inserted in the corresponding opening at the
bottom of the base charging station.
This connection is closed ex-factory for a base
charging station for hazardous areas.
To connect the base charging station in a non-hazardous area,
the connection cable for the power supply and the PC is
inserted in the opening at the bottom of the base charging
station. Use iSCAN2XXCAB1, 2, 3 or 4.
If the cable has been inserted fully you can hear a
"click". Check that the cable fits firmly.
Place the handheld scanner onto the charging station.
Insert the lower part of the handle to ensure that the contacts
for charging are connected properly.
The LED at the head of the scanner will come on to
indicate successful charging.
