Extronics Limited, registered in England and Wales no. 03076287
Registered office 1 Dalton Way, Midpoint 18, Middlewich, Cheshire, UK. CW10 0HU
Tel:
+44 (0) 845 277 5000
Fax:
+44 (0)845 277 4000
E-mail:
Web:
www.extronics.com
26
The currently active power is marked with an asterisk. By default, the 200mW power level is active.
You can activate only one power level at a time.
To activate a different power level, scroll through the POWER options by pressing the trigger button
until the desired power level is displayed. Hold down the trigger button for a few seconds, the power
level option will begin to flash. Once activated, the device returns to the main menu.
Note that when the reader is configured in the EASY2RD profile, you can also use the CAEN RFID
Easy Controller application or the SetPower function of the SDK (Software Development Kit) library
to set the power.
12.1.5
CLOCK
The reader does not consider the date and time until this has been initially set by the user.
To scroll through the menu options, press the trigger button.
The CLOCK menu is the last option of the menu. To select it, hold down the trigger button to enter
the sub-menu.
The CLOCK submenu options are the following:
•
Date: the date is the first option of the clock submenu.
o
To set the date, hold down the trigger button for a few seconds. The date is shown
in the format dd mmm yy (e.g. 18 Oct 16).
o
Press the trigger button to change the day value. Then hold down the trigger button
to save the day and pass to the month value.
o
Press the trigger button to change the month value. Then hold down the trigger
button to save the month and pass to the year value.
o
Press the trigger button to change the year value. Then hold down the trigger button
to save the year and hold down again to save the complete date.
o
The date begins to flash and the reader returns to the main menu.
•
Time: the time is the second option of the clock submenu
o
Scroll through the CLOCK options menu by pressing the trigger button until the Time
option is displayed
o
Hold down the trigger button for a few seconds to set the time. The time is shown in
the 24-hour format hh:mm (e.g. 12:51).
o
Press the trigger button to change the hh value. Then hold down the trigger button
to save the hour value and pass to the minutes value.
o
Press quickly the trigger button to change the “mm” value. Then hold down the
trigger button to save the minutes value and hold down again to save the complete
time.
o
The time begins to flash and the reader returns to the main menu.
To return to the main menu, press the power button.
In the OFFLINE profile, if you want to show the date and time information for read tags, you also
need to set the clock and enable the Time Stamp option.
