Extronics Limited, registered in England and Wales no. 03076287
Registered office 1 Dalton Way, Midpoint 18, Middlewich, Cheshire, UK. CW10 0HU
Tel:
+44 (0) 845 277 5000
Fax:
+44 (0)845 277 4000
E-mail:
Web:
www.extronics.com
25
The currently active state is marked with an asterisk. By default, all the BEEP options are disabled.
Note that you can enable or disable the beeper for each option independently so that the beeper
can be simultaneously active on more than one option.
To return to the main menu, press the power button.
12.1.3
VIBRATE
To scroll through the menu options, press the trigger button. The VIBRATE menu is the third option
of the menu. To select, hold down the trigger button.
The VIBRATE submenu options are the following:
•
PWRUP: vibration at the power on of the reader
•
PWRDOWN: vibration at the power off of the reader
•
SCANTAG: vibration at the identification of a tag
To enable/disable the submenu options, scroll through the VIBRATE options menu by pressing the
trigger button until the desired VIBRATE option is displayed, then hold down the trigger button for a
few seconds.
Scroll through enable and disable options by pressing the trigger button and hold down the trigger
button to activate the option. The enable (or disable) option will begin to flash. Once activated, the
device returns to the main menu.
The currently active state is marked with an asterisk. By default, all the VIBRATE options are
disabled.
Note that you can enable or disable vibration for each option independently so that vibration can be
simultaneously active on more than one option.
To return to the main menu, press the power button.
12.1.4
POWER
Through the POWER menu you can set the power level emitted by the reader and hence the read
range. To scroll through the menu options, press the trigger button. The POWER menu is the fourth
option of the menu. To select, hold down the trigger button.
The POWER submenu options are the following:
•
25 mW
•
50 mW
•
100 mW
•
200 mW
To scroll through the POWER options, press the trigger button. To return to the main menu, press
the power button.
