Extron electronics XMP 240 C AT, User Manual

Page: 36 / 139

XMP 240 C AT • DSP Configurator Software 30
Time
, and
Release Time
to customize NLP reduction parameters.
4
Double Talk Echo Reduction — Provides a text box to enter a reduction value (in dB)
when double talk occurs. Double talk is when near end talkers and far end talkers are
speaking simultaneously while AEC is engaged.
5
Comfort Noise Text Box — Provides an ambient noise signal to prevent states of
complete silence that may be perceived as a failed or dropped connection. 0 dB is the
default.
Input Dynamics Blocks
Double-click the
Dynamics
block to open the dynamics drop-down menu.
Figure 46. Dynamics Block and Drop-Down Menu
From the
Dynamics
drop-down menu, four types of dynamics processors are available.
Select a dynamics processor type to insert it into the
Dynamics
block.
There are two
Dynamics
blocks available per mic/line input channel. Each block can be
configured with any of the processor types.
The four types of dynamics processors available are:
• AGC (Automatic Gain Control) on the next page
•
Compressor on page 32
• Limiter on page 33
• Noise Gate on page 34
Once a dynamics processor is inserted, double-click the dynamics block icon to open the
corresponding dialog box.
Figure 47. AGC, Compressor, Limiter, and Noise Gate Icons
If a dynamics processor has been inserted and needs to be changed to a different dynamics
processor, right-click the dynamics block, hover over
Insert
, and select a new processor to
insert it (see figure 48).
figure 26. Dynamics Block and Drop Down Menu