Extron electronics XMP 240 C AT User Manual Download Page 37

Page: 37 / 139

XMP 240 C AT • DSP Configurator Software

Figure 48.

Changing Dynamics Processors

AGC (Automatic Gain Control)

Figure 49.

AGC Dialog Box

Dynamics Channel Name

— This name changes to match the default or user defined

input name.

AGC Graph

— Graphically displays AGC parameter settings. Parameters can also be

adjusted using this graph. Click and drag the yellow lines to adjust the

Window

parameter.

Click and drag the bottom dot to adjust the

Threshold

parameter. Click and drag the

middle dot to adjust the

Maximum Gain

parameter. Click and drag the top dot to adjust

the

Target

parameter.

AGC Parameters List

and Control

— Provides text boxes to adjust all AGC

parameters.

Attack Time

Hold Time

, and

Release Time

also have sliders that adjust

their respective parameters. Click a slider once and use the <

Left Arrow

> and

Right Arrow

> keys to adjust the respective parameter in 1 ms steps.

Bypass Button

— Bypasses the AGC processor. When the button is red, bypass is

enabled.

Set Defaults Button

— Resets all AGC parameters to their default values. To view

individual parameter default values, see the

DSP Configurator Help

file by clicking the

Dynamics Help

button (

) and opening the

About Dynamics

topic.

OK Button

— Confirms changes made to the contained parameters and closes the

AGC

dialog box.

Cancel Button

— Reverts any changes made to the contained parameters back to

their states when the current instance of the

AGC

dialog box was opened and closes the

dialog box.

Dynamics Help Button

— Opens the

Dynamics Operation

topic of the

DSP Configurator Help

file for further assistance in operating dynamics processors.

Dynamics Channel Name

AGC Graph

AGC Parameters List and Control

Bypass Button

Set Defaults Button

OK Button

Cancel Button

Dynamics Help Button

figure 27. AGC Dialog Box

Summary of Contents for XMP 240 C AT












































































































































Search results

Summary of Contents for XMP 240 C AT

Reviews:

Related manuals for XMP 240 C AT

Brands by name

Popular brands

Extron electronics XMP 240 C AT, User Manual

Search results

Summary of Contents for XMP 240 C AT

Reviews:

Related manuals for XMP 240 C AT

Brands by name

Popular brands