VTT001 and VTR001 • Installation
Installation, cont’d
2-12
To attach a wall box to wood, use four #8 or #10 screws or
10-penny nails. A minimum of 1/2 inch (1.3 cm) of screw
threads must penetrate the wood.
To attach a wall box to metal, use four #8 or #10 self-tapping
sheet metal screws or machine bolts with matching nuts.
7.
Mount the module(s) onto a faceplate or frame, then cable
and test the transmitter/receiver module(s) before
fastening it into the wall box or bracket. The cables are
inaccessible after installation.
Wall box mounting
1.
Attach the transmitter/receiver module(s) to the
mounting frame with the included #4-40 screws.
2.
Attach all power and video cables to the rear of the
transmitter/receiver. Power on the transmitter/receiver
now if the external power supply cannot be accessed once
the transmitter/receiver is mounted.
3.
Attach the mounting frame (with the attached
transmitter/receiver module(s)) to the wall box, using the
two included mounting screws.
Wall opening
flush with
edge of box
VT
T0
01
M
AA
P
PO
WER
Extron
CPM101
Mounting Frame
VIDEO INPUT
VT
T0
01
M
AA
P
Figure 2-8 — Attaching the mounting frame to a wall
box
4.
Connect the video input and output devices to the front
faceplates of the transmitter and receiver, respectively.
5.
Power on all devices.
Summary of Contents for Twisted Pair Receiver VTR001
