Introduction
This guide describes the function, installation, and operation of the TLI Pro 201. Unless
otherwise stated, the terms “interface” and “TouchLink Pro interface” also refer to this
model.
This section provides an overview of the TLI Pro 201:
•
•
•
About the TLI Pro 201
The Extron TLI Pro 201 is a TouchLink Interface that allows a third-party 4K touchscreen
display to be used as a point of control within an Extron Pro Series control system. The
interface includes a scaled HDCP 2.3-compliant HDMI input for video preview, supporting
resolutions up to 4K @ 30 Hz. The scaled output supports signal resolutions up to
4K @ 30 Hz at 4:4:4.
Features
•
Compatible with third-party touchscreen displays
— Up to 4K @ 30 Hz at 4:4:4,
allowing them to be used as a point of control within an Extron Pro Series control
system.
•
Compatible with all IP Link Pro control processors and HC 400 Series
Meeting Space Collaboration Systems.
•
HDCP 2.3-compliant HDMI Input
— For full-motion video preview and monitoring.
•
One high speed USB 2.0 port
— For third-party touch displays or HID support.
•
PoE+ compatible
— Product is powered directly by a PoE+ switch or injector,
eliminating the need for bulky local power supplies.
•
Fully customizable using Extron control system software
— GUI Designer
combined with Global Configurator Plus, Global Configurator Professional, or
Global Scripter.
•
Uses the same HID device drivers as the Annotator 300 and TLI Pro 101.
•
Advanced Extron video signal processing with a high-performance scaling
engine.
•
Automatic clock synchronization
— Allows touchpanel to display the accurate
time and date.
•
Adjustable sleep timer puts interface into sleep mode.
•
Compact 1 inch (25 mm) high, half rack width metal enclosure low profile
enclosure
— Allows discreet installation within a lectern or behind a flat panel display.
TLI Pro 201 • Introduction
1
Summary of Contents for TLI Pro 201
Page 6: ......
Page 8: ...TLI Pro 201 Contents viii ...
