Extron electronics SMP 111, User Manual

Page: 23 / 124

SMP 111 • Front Panel Operation 15
Front Panel Operation
This section of the manual discusses the operation of the SMP 111 front panel.
Topics covered include:
• Front Panel Features
• SMP 111 Power Up Procedure
• Record a File
•
Front Panel Lockout (Executive Mode)
Front Panel Features
SMP 111
STREAMING MEDIA PROCESSOR
INPUT
OUT
HDCP
HDMI
HDMI LINE HDMI
CLIP
AUDIO
CONFIG
USB STORAGE
ALARM
MARK
A C
B
D
G E H
F
Figure 6. SMP 111 Front Panel
A
Power LED
E
HDCP Input LED
B
Alarm LED
F
HDMI LED
C
USB mini-B port for Configuration
G
Audio Signal and Clip LEDs
D
USB type A port for external storage
H
Record controls with LED indicators
A
Power LED
–
•
Green – The power is on and the unit is operational.
•
Blinking Green – The power is on but the unit is still booting (not operational).
B
Alarm LED — Lights up red when one or more alarms are triggered (see Alarm on
page 49 for more information on the types of alarms and how to clear them).
C
USB mini-B port for Configuration
— Connect a control device to this port with a
USB mini-B cable (not supplied). Use this port to send SIS commands to the SMP 111
for device configuration and control (see
Remote Communication and Control
starting on page 63).
Configuration and adjustments can be performed using the embedded web pages (see
Web-Based User Interface on page 18), and the SIS commands (see Remote
Communication and Control starting on page 63).
figure 6