SMP 111 • Reference Information
108
SD Card Formatting
All data will be erased as part of the card initialization, so Extron recommends that any data
on the old card be backed up before the new card is installed.
Once the new card is installed the user must format the card via the embedded web page:
Troubleshooting
>
System
Resets
>
Reset
>
Delete
Content
The unit will reboot after formatting. The SD card is ready for recording after the reboot.
Alternatively, the user can initiate a
Delete
Content
from the Front Panel by following
these steps:
1.
Press the
Stop
and
Pause
buttons simultaneously for 5 seconds.
Mark
button will blink red for 3 seconds awaiting confirmation to
Delete
Content
.
2.
Press
Mark
button within 3 seconds to confirm the
Delete
Content
command.
If the
Mark
button is not pressed, the request is cancelled.
The SMP 111 automatically reboots after card formatting is completed.
