Extron electronics PVS 407D, User Manual

Page: 56 / 70

To configure the settings for use with DHCP:
1. Set the DHCP slider (
A
) to On .
2. Click SAVE (
B
). An IP address is automatically assigned to the device. Contact your
IT administrator for more information.
Click
CANCEL to exit the process without making any changes.
To configure the settings with a static IP address:
1. Ensure the DHCP slider (
A
) is set to Off .
2. In the IP Address field (
C
), enter an IP address for the device.
3. In the Subnet field (
D
), enter the subnet mask for the device.
4. In the Gateway field (
E
), enter the default gateway to be used.
5. Click SAVE (
B
) to apply the changes, or click CANCEL to exit the process without
making any changes.
NOTE: The default TCP/IP settings are:
• IP address = 192.168.254.254
• Subnet Mask = 255.255.0.0
•
Default Gateway = 0.0.0.0
Audio Stream
The Audio Stream panel (see figure 27 on page 47) shows the current audio stream
settings for the PVS 407D. In this example, the settings are shown after the LinkLicense
is installed. (Refer to LinkLicense on page 53 for installation information.)
The Audio Stream settings on the PVS 407D default webpage are disabled until the
PVS 407D Audio Decoding LinkLicense is applied to the switcher. With the LinkLicense
successfully added, audio stream settings are accessible as shown in the figure. IP
address and UDP port settings should be coordinated with your GlobalViewer Campus
Communication Suite and network administrators for proper operation.
To change the settings, click
EDIT to access the Audio Stream Settings dialog box
(see figure 31 on the next page).
1.
Change the desired criteria or click Reset to default (
A
) to return to the factory
settings.
2. Click SAVE (
B
) to apply the changes, or click CANCEL to exit the process without
making any changes.
The settings include:
• IP Multicast Address (
C
): Enter a Multicast address on which to receive an audio
stream on the defined UDP Public or Priority port. Default: 239.255.25.250 .
• Server IP Address
(
D
): Enter the IP address of the GlobalViewer Campus
Communication Suite (GVCCS) server PC. Default is 0.0.0.0 .
• UDP Public port (
E
): Enter the port number for receiving a UDP stream. Set
UDP port to a value between 1024 and 65535 . UDP Port numbers 0 to 1023 are
reserved and cannot be assigned. Default is 3030 .
• UDP Priority port (
F
): Enter the port number for receiving a priority UDP stream. Set
UDP port to a value between 1024 and 65535 . UDP Port numbers 0 to 1023 are
reserved and cannot be assigned. Default is 2020 .
PVS 407D • Using the Internal Web Page 50