29
PVS 407D • SIS Communication and Control
Command
ASCII Command
(host to switcher)
Response
(switcher to host)
Additional Description
VoiceLift – VLR 302 and VLR 102
Request VoiceLift status
information (VLR 302)
34I
Verbose mode 2/3
Rly1
X4)
•
Rly2
X4!
•
Pair
X3*
X3(
•
Ver
X4@]
or E25
]
Inf34*Rly1
X4)
•
Rly2
X4!
•
Pair
X3*X3(
•
Ver
X4@]
or Inf34*E25
]
View information on VoiceLift status.
Device is not present.
Device is not present.
View VoiceLift status
(VLR 102)
34I
Verbose mode 2/3
X4%
•
X4^
•
X4&]
or E25
]
Inf34*
X4%
•
X4^
•
X4&]
or Inf34*E25
]
View information on VoiceLift status.
Device is not present.
Device is not present.
NOTES:
•
Returns
E25
(device not present) when VoiceLift receiver is not detected/present.
Example A:
Rly11 Rly
20
Pair11 Ver
1.00.0002
.
Example B:
Inf34* Rly11 Rly
20
Pair11 Ver
1.00.0002
•
Switcher sends out the unsolicited responses (with tag) via Ethernet/USB/RS-232 whenever there is any state change on the VoiceLift
receiver.
KEY:
X3*
= LINK slot 1
0
= LINK slot 1 is not paired or pairing fails.
1 = LINK slot 1 is paired to a microphone.
9 = Microphone is on/ connected or LINK slots are occupied and cannot pair.
X3(
= LINK slot 2
0
= LINK slot 2 is not paired or pairing fails.
1 = LINK slot 2 is paired to a microphone.
9 = Microphone is on/ connected or LINK slots are occupied and cannot pair.
X4)
= Relay 1
0
= Off 1 = On
X4!
= Relay 2
0
= Off 1 = On
X4@
= Firmware Version
Firmware version info with build.
Example response:
1.00.0042
X4%
= Relay
0
= Off 1 = On
X4^
= Contact closure input state
0
= Open 1 = Closed
X4&
= VoiceLift microphone status
0
= No carrier/ microphone is off
2 = Channel B or D
1 = Channel A or C
3 = Channels A or C and B or D
VoiceLift Pro Microphone Usage
View microphone usage
(hours)
E
USAG
}
Verbose mode 2/3
HHHHH:MM
]
or E25
]
or E14
]
Usag HHHHH:MM
]
or Usag*E25
]
or Usag*E14
]
HHHHH:MM = hours: minutes
Device is not present.
VLR 102 detected, expected VLR 302.
Reset microphone usage
E
0USAG
}
Usag00000:00
]
or Usag*E25
]
or Usag*E14
]
Reset usage to zero.
Device is not present.
VLR 102 detected, expected VLR 302.
NOTES:
•
Maximum hours with five digits from
00000
to 99999 values. Maximum minutes with two digits from
00
to 59 values (ex. 12345:15).
•
Value is capped at 99999:59 and remains until it is reset.
•
Returns
E25
(device not present) when VoiceLift receiver is not detected/present.
