NAV SD 501 and NAV SD 101 Scaling Decoders • HTML Operation
57
PRELIMINAR
Y
Advanced Networking
The
Advanced
Networking
selection on the
Device
Settings
on
page 48) opens a read-only pane that shows the port usage parameters of the decoder
(see figure 62). The parameters can be edited by clicking the
Edit
button (
1
). An editable
version of the selection opens (see figure 63).
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Figure 62.
Advanced Networking Selection
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
*
*
NAV SD 501 only
Figure 63.
Editable Advanced Networking Selection
1
Reset to Default
— Click to restore the advanced networking settings of the decoder
to their default values.
2
Link Layer Discovery Protocol (LLDP)
— LLDP, a vendor-neutral protocol, is used
by network devices to discover, identify and share information between two directly
connected network devices. Click to toggle LLDP on and off.
3
Multicast IP addresses
— Click in these fields and type in valid IP addresses for your
decoder.
NOTES:
•
Multicast Discovery IP
is the IP address that the decoder uses to discover
and communicate with all other NAV devices on the network.
•
USB Multicast IP
(NAV SD 501 only) is the multicast IP address that the
decoder uses to send and receive the USB stream.
4
Save and Cancel buttons
— Click
Save
to take changes or
Cancel
to abandon
them. Clicking either button closes the editable selection.
