Remote Operation, cont’d
MVX 44 / 48 / 84 / 88 VGA Matrix Switchers • Remote Operation
4-22
PRELIMINAR
Y
Master-Reset selection
Master-Reset clears all ties and presets, clears all video and audio mutes,
sets all input audio gain to unity gain (+0 dB), and sets all output levels to the
factory default (professional level, +4 dBu).
Using Emulation mode
Emulation mode allows you to set up the software without attaching the switcher
to the computer. To use Emulation mode, do the following:
1.
Click
Start
>
Programs
>
Extron Electronics
>
Matrix Switchers
>
MATRIX
Sw Control Pgm
.
2.
Choose
Emulate
, and click
OK
.
3.
Choose an emulation file to open, and click
OK
. The file DEMO.MTX provides
a sample of a completed matrix setup. The file NEW.INI provides a blank
setup to get you started.
4.
Enter the file name under which you want to save any changes to the file, and
click
OK
.
5.
Select
1, 2, or 3
as the number of video boards,
1 or 2
as the number
of audio boards, and
MVX Series
as the matrix model for which you are
preparing a configuration; and click
OK
(figure 4-17).
Figure 4-17 — Emulation mode configuration
6.
Continue using the program as described in steps 3 through 7, beginning on
