background image

FCC Class A Notice

This equipment has been tested and found to comply with the limits for a Class A digital 
device, pursuant to part 15 of the FCC rules. The Class A limits provide reasonable 
protection against harmful interference when the equipment is operated in a commercial 
environment. This equipment generates, uses, and can radiate radio frequency energy and, 
if not installed and used in accordance with the instruction manual, may cause harmful 
interference to radio communications. Operation of this equipment in a residential area is 
likely to cause interference. This interference must be corrected at the expense of the user.

NOTES:

 

• 

(if only this paragraph is used, reformat to single NOTE format.) For 
more information on safety guidelines, regulatory compliances, EMI/EMF 
compatibility, accessibility, and related topics, see the 

Extron Safety and 

Regulatory Compliance Guide

 on the Extron website.

VCCI-A Notice

この装置は、クラスA情報技術装置です。 この装置を家庭環境で使用すると、電波妨害を引き

起こすことがあります。 その場合には使用者が適切な対策を講ずるよう要求されることがあります。   
 

VCCI-A

Conventions Used in this Guide

Notifications

The following notifications are used in this guide:

ATTENTION:

 

• 

Risk of property damage. 

• 

Risque de dommages matériels.

NOTE:

  A note draws attention to important information.

TIP:

  A tip provides a suggestion to make working with the application easier.

Specifications Availability

Product specifications are available on the Extron website, 

www.extron.com

.

Extron Glossary of Terms

A glossary of terms is available at

 

http://www.extron.com/technology/glossary.

aspx

.

Summary of Contents for MP 101



























Reviews: