Extron electronics MMX 32 VGA MTP, Setup Manual

Page: 4 / 4

Setup Guide — MMX 32 VGA MTP cont’d
Extron USA - West
Headquarters
+800.633.9876
Inside USA / Canada Only
+1.714.491.1500
+1.714.491.1517
FAX
Extron USA - East
+800.633.9876
Inside USA / Canada Only
+1.919.863.1794
+1.919.863.1797 FAX
Extron Europe
+800.3987.6673
Inside Europe Only
+31.33.453.4040
+31.33.453.4050 FAX
Extron Asia
+800.7339.8766
Inside Asia Only
+65.6383.4400
+65.6383.4664 FAX
Extron Japan
+81.3.3511.7655
+81.3.3511.7656 FAX
Extron China
+400.883.1568
Inside China Only
+86.21.3760.1568
+86.21.3760.1566 FAX
Extron Middle East
+971.4.2991800
+971.4.2991880 FAX
68-789-50
Rev. A
03 10
Command ASCII
command
(host to
switcher)
Response
(switcher to
host)
Additional description
Create ties
Tie input
X@
to
output X# , A and V
X@
*
X#
! Out
X#
In
X@
All
]
Tie input
X@
audio and video to
output X# .
Tie input X@ RGB to
output X#
X@
*
X#
% Out X# In X@ RGB ] Tie input X@ RGB to output X# .
Tie input X@ audio
to output
X#
X@
*
X#
$ Out X# In X@ Aud ] Tie input X@ audio to output X# .
RGB mute
RGB mute X# *1B Vmt X# *1
]
Mute RGB output X# .
RGB unmute X# *0B Vmt X# *0
]
Unmute RGB output X# .
Read RGB mute X# B X(] Show RGB mute status X( .
Global (where
X#
is not included, global RGB mute is activated.)
RGB mute all 1*B Vmt1
]
Mute all RGB.
RGB unmute all 0*B Vmt0
]
Unmute all RGB.
Audio mute
Audio mute X# *1Z Amt X# *1 ] Mute audio output X#
.
Audio unmute X# *0Z Amt X# *0 ] Unmute audio output X# .
Read audio mute X# Z X(] Show audio mute status X(
.
Global (where X# is not included, global audio mute is activated.)
Audio mute all 1*Z Amt1
]
Mute all audio.
Audio unmute all 0*Z Amt0
]
Unmute all audio.
View ties and output mute
View RGB output
tie
X# %
X@]
Output X# is tied to input X@
video.
View audio output
tie
X# $ X@] Output X# is tied to input X@
audio.
Output mute X# VM X2)] Output X# mute status is X2)
X@ = Input number (for tie) 0 – 3, 0 = disconnected
X#
= Output number 1 or 2
X( = 0 or 1 0 = off, 1 = on
X2) = Mute 0 = no mute, 1 = video mute, 2 = audio mute,
3 = video and audio mute
N
4
© 2010 Extron Electronics. All rights reserved.
Control by SIS commands
The switcher can be controlled through the use of Extron SIS commands via the RS-232
connector. For full details on SIS commands refer to the MMX 32 VGA MTP Users’s Guide.