KNX 100G • Setup Guide
This setup guide covers the physical installation of the KNX 100G and KNXnet/IP tunneling from a PC to a KNX network during
configuration and commissioning.
The KNX 100G allows better integration of control with KNX building management systems (BMS). The product serves as a
gateway for control systems and ETS software to the KNX bus, and it is designed to be installed onto a DIN rail with a width of 1
unit (18 mm).
Power is supplied via the KNX bus; an external power supply is not necessary. The KNX bus can be accessed from any point on
the LAN. The IP address can be obtained by a DHCP server or by manual configuration. There are five simultaneous connections
possible for access via KNXnet.
1
Figure 2.
KNX 100G DIN Rail Installation
Installing Onto DIN Rail
1.
Ensure the DIN rail is securely mounted onto the wall or furniture.
2.
Place top rear against wall/furniture (Figure 2,
1
).
3.
Slide the unit down onto top of rail (Figure 2,
2
).
4.
Tilt the unit and snap onto the rail (Figure 2,
3
).
Figure 1.
KNX 100G Controls and Displays
DIN Rail
KNX 100G
Patent(s): www.extron.com/patents
33-2700-01
A
E
Pro
g. KN
X
__.
__.
____
E
Pro
g
__.__.
___
E
KNX
10
0G
KN
X
Mode
IP
P/Es
c
Con
n
Up
Con
n
Dn
AN
33-25
58-01
B
est
est
KNX 100G
Place top rear against
wall/furniture.
Slide down the unit
onto top of rail.
Tilt the unit and
snap into rail.
1
2
3
KN
X 1
00
G
P
ate
nt(
s):
w
w
w
.e
xtr
on
.co
m
/p
ate
nts
33
-2
70
0-
01
A
E
KNX
100
G
P
ate
nt(
s):
w
w
w
.e
xtr
on
.co
m
/p
ate
nts
33
-2700-
01
A
E
KNX 100G
Patent(s): www.extron.com/patent
s
33-2700-01
A
E
Prog.
KNX
__.
__.
___
_
E
Prog
__.
__.___
E
KNX
100
G
KN
X
Mode
IP
P/E
sc
Con
n
Up
Con
n
Dn
AN
33-
2558-
01
B
est
est
LAN
33-2558-01 B
www.extron.com/patent
s
Bottom View
I
A
B
E
G
H
C
D
F
A
KNX Bus connector
B
Programming Mode Button
C
Programming Mode LED (Red)
D
KNX LED (multicolor)
E
Mode LED (multicolor
)
F
IP LED (multicolor)
G
Button Connection Up
H
Button Connection Down
I
Ethernet/LAN Connector